I've tried to import materials/models from CSGO for about two days now and it ALWAYS crashes. Any idea why?
"Log file open, 06/19/18 13:28:43
LogWindows: Failed to load 'aqProf.dll' (GetLastError=126) LogWindows: File 'aqProf.dll' does not exist LogWindows: Failed to load 'VtuneApi.dll' (GetLastError=126) LogWindows: File 'VtuneApi.dll' does not exist LogWindows: Failed to load 'VtuneApi32e.dll' (GetLastError=126) LogWindows: File 'VtuneApi32e.dll' does not exist LogInit: Display: Running engine for game: HammEUr LogPlatformFile: Not using cached read wrapper LogInit: Display: RandInit(1962371680) SRandInit(1962371680). LogInit: Read version file with build ID '3944462' LogInit: Overriding engine version to CL 4033788, compatible CL 3944462 LogInit: Registered custom module enumerator with build ID '3944462' LogTaskGraph: Started task graph with 5 named threads and 23 total threads with 3 sets of task threads. LogStats: Stats thread started at 0.259854 LogD3D11RHI: Aftermath initialized"
Unfortunately, none of the things in this log have anything to do with HammUEr, so I can't really help you with this. Some of those dll errors seem to refer to intel vtune, but a quick google doesn't seem to give any decent solutions, apart from maybe needing administrative rights when you install/run unreal engine? Good luck, hope you figure it out.
I had just recently found out about this plugin for UE4, and I am actually running into the exact same issue. I am able to get the textures imported just fine, but when attempting to import .map or files it finishes loading from master list, the I get an immediate CTD.
I did try loading a .vmf which I had exported from Hammer Source SDK (originally on GoldSrc, used converter) and the map loaded into UE4 only once, any other time (same map) nothing showed up after loading and referring to master material list. I'm running Epic Games Launcher as Admin, and I get the same thing as brikkew. I'm on UE4 4.19.2 w/ latest build of HammUEr
I'm trying to import the csgo materials and textures, but HammUEr seems to not being able to read the VMTs. It is importing the textures, but doesn't create material-instances. Only when using the "create materials for not-used textures" dialog, it creates material-instances, but none of them uses the decal-material. (I exctracted the material files with gcfscape from csgo's pak01_dir.vpk and i'm using ue4.19)
I get a lot of errors like this in the output log:
"
LogTemp: Warning: Could not find , cutting down to smallest identifier. LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b, aborting creation of material LogTemp: Warning: Could not find , cutting down to smallest identifier. LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b1, aborting creation of material LogTemp: Warning: Could not find , cutting down to smallest identifier. LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b1_blend, aborting creation of material LogTemp: Warning: Could not find , cutting down to smallest identifier. LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b2, aborting creation of material
There was a change to the UE API I wasn't aware of, which led to this problem happening. I've uploaded a new version, so please download "HammUEr 1.8 for 4.19 fixed" and try again.
I keep getting errors saying, "Binaries for the 'HammUEr' plugin are missing or incompatible with the current engine version." It also says "'HammUEr' failed to load because module 'HammUErRuntime' could not be found" I have UE 4.19.2 and HammUEr 1.8
The plugin should work with 4.19.2 as uploaded, so something might have gone wrong while downloading/extracting it. Please download the new fixed version and try again.
I'm also having this exact problem, tried downloading again a couple times.
Warning: No filename provided for module HammUErRuntime Warning: ModuleManager: Unable to load module 'HammUErRuntime' because the file 'C:/Users/Josh/UnrealEngine/Engine/Binaries/Win64/' was not found.
the hammuer dll's are in the plugins binary directory. why is it looking in the engine binaries?
Weird, if the others show up, it should show up as well. If not, there's an example of what it should look like in the manual on page 6 (lower picture), so just build something that looks like that and use it instead.
I... have some trouble understanding what you're asking, but files that are imported end up wherever your unreal engine project is (because they need to be converted to something UE understands), which I guess is somewhere on your C drive in your case?
Unreal Engine uses a Cache to store temporaly your materials and meshes. You can change this folder-destination to your other drive under Edit->Editor Preferences and then under General->Global->Local Derived Data Cache.
It seems you're not on discord anymore Tursfter? We had a converstation almost a year ago but I can't find it again. Anyway, I encountered this bug and I can't seem to fix it. In Radiant it looks normal but when I import it in UE4, the textures arent aligned anymore (Still using UE 4.15.3 with the 1.7.1 version, soon we'll update to 4.19 when it's being released) Any ideas? (This doesn't happen on all faces but it starts to happen more often)
The 4.15 builds are pretty ancient by now, so hopefully a move to a newer one should fix this. If not, try moving the brush in hammer and then moving it back into place where it was, or check the texturing and redo it so it looks the same but the values are different (if that makes sense)
I am still having issues with the 4.15.3 version of the tool. I am able to get all the materials and models over, but importing the .bsp still causes it to crash.
I don't have access to my code archive at the moment, so I can't really check with an actual 4.15 build, but my guess is it's got something to do with the displacements?
(Also, this is a decompile, and decompiles are technically not supported. Maybe try opening it in HammUEr and saving it back to clean up whatever the decompiler did?)
Hallo, when I want to import props with porpUEr it all process and say done. Then I close that window and it wasn´t anywhere after restart too. What I need to do ? Thanks.
If you selected one or more files, please check the log to see if there were any errors while importing. Also check to see if any files were created in your project folder in windows explorer, because they don't always show up immediately in UE. (Although they should show up the next time you open the editor)
Followed official tutorials and some 3rd party, used provided base/decal presets. Materials/Textures doesn't work in CS:GO maps. Props/Maps etc works fine. They show in HammUEr:
Open your base material and check to see if it says anything about errors there, there might be a broken texture reference there you have to fix before it'll actually render.
The BaseMaterial had error for missing texture in NormalMap, so i added flat_normal there and saved. Importing again, will let you know if that solved the issue.
I'm having an issue with shadows on imported meshes that touch. There's really ugly shadow artifacts in between the meshes. I tried fixing with the world and light settings in my level, including upping the build quality, but nothing worked. Here's a screenshot showing my issue:
Is there any settings in HammUEr that I can change to fix this?
Hi. So this is a great piece of software. However, I am unable to import my .vmf in the 4.15 version of UE4. I am able to get the textures and models over, but it crashes the engine when importing the .vmf. I've tried a couple different systems and a few new Projects. Now I don't seem to have this problem with newer iterations of the engine and I haven't tried older versions.
The pre-4.16 builds are rather old by now, and even Epic doesn't really support them any longer, officially. Is there a specific reason you need to use such an old version of the Unreal Engine? If there is, I can *try* to debug it based on your logs and the vmf file, but if it imports fine in a newer version...
It works beautifully in 4.18, but I'm trying to import my work into PavlovVR (which appears to be built in the 4.15 version of the engine, or the template for it is). I would be happy to import the assets into 4.18 and migrate them to a project from older version but that doesn't seem to work either.
If it helps, the project log hits me with with "Failed to load ANSI text file: [users/x/x/x/x/x/x/x] materiallist." before crashing. I also tried rebuilding the masterlist but that didnt help either.
If there is another way to work around this, I'm open to suggestions.
Just tested it, and it should import fine. It does seem to point to the texture Models/props_c17/fence_alpha, so if it couldn't find that, that might be why?
Trying out Unreal for the first time, so it's quite likely I'm doing something wrong. It seems that just adding HammUEr as a plugin causes the compile to fail. I'm using "HammUEr 1.8 Alpha 3 for 4.18" and my Unreal version is 4.18 (4.18.0-3709383+++UE4+Release-4.18)
When trying to compile, I get "ERROR: Could not find definition for module 'HammUErRuntime' (referenced via Test.uproject -> HammUEr.uplugin)"
The simplest way to reproduce is start a new project (blank or FPS) and compile from in-editor. It will succeed. Then add HammUEr as a plugin, restart the editor and compile again. It will fail.
Am I perhaps missing some extra step needed to compile code?
Just to clarify though, the actual tools do seem to work in the editor. I can import my Source materials and maps just fine. It's just the compile step that fails.
Hey there. It does a quite good job, but is there a possibility to add the ability import the Brushes as UE BSP Brushes? That would be awesome, because Brushes in UE are unique Actors instead of Static Mesh assets (It does not bloat the content folder)
It would require rebuilding the pipeline (since people explicitly didn't want anything to do with UE4's BSP tools), and wouldn't support everything, but I can try and fork a build that does that. Wouldn't happen overnight, though, so don't hold your breath.
Hi, I would like to port my Soldier Of Fortune 2 maps, any issue about compatibility with SOF2 ? I have the .map files made with GTKradiant. Thank you.
Don't know anyone that's tried importing SOF2 maps yet, so I wouldn't be able to give a definitive answer, but I know people have imported Jedi Knight Academy maps without too much trouble, so it all depends on how 'vanilla' Raven kept the map format, I guess. I could try importing one, if you put it online somewhere?
What's the proper way to deal with seams in between brushes that will inevitably occur? I'm importing a simple map with a couple rooms in and there are very obvious seams in between the brushes, and also between the floor and the walls. Obviously this occurs a lot with modular maps in UE4 but does Hammuer offer a solution to help alleviate this?
Have you tried turning on "Round accepted points to nearest integer"? That should be able to help with some of those problems (although it can't really help with larger gaps)
You can also minimize this by grouping the floors, and do a nodraw pass to ensure there are no extra faces. (ie: do what vbsp does manually, with nodraw)
so, when importing props with hammuer, it doesnt say building master materials list, and when it finishes importing, no textures are connected to the mesh, so its just all grey, for e.g grey chicken, what do i do? I have imported all textures into csgo/textures, and all models into csgo/models
Pretty sure the base materials were fine, ill re import the textures later, can you show me what the base materials should look like just so i can confirm?
Hey, I'm having problem with CS:GO map import. After importing mats, props and then the map, models are showing up on the level, but not the biggest parts such as floors, walls, buildings etc., only models. But! I can see those bigger meshes in content browser, still there are too many of them to actually place them on my own. What do I possibly do wrong, or what should I do, to make them place on the level? As I said, everything with those meshes not placed in the level is fine, mats are assigned and created, they are just not placed at all.
... huh. Did it really not create any actors for the actual level geometry in your map? Or are they just not being rendered? Have you tried clicking the eye icon off and on to force a show all refresh, like in the troubleshooting section of the documentation?
Uhh, it's like, it places all those small models on the map except those big ones which are in contest browser still. Dunno why, tried refreshing the view as you said but it didn't fix anything. Worth to add is the fact, that it happens only to the newer cs:go maps, such as Inferno, but also Cache which is pretty old map, but I noticed something weird bout it. Both inferno and cache are having different type of write or something like that, cause they do not have the normal map compression and then materials + models in the game folder, I have to decompile them with embed files so the file structure is different. I gotta load materials separately cause I get them from the .bsp file after decompiling.
Weird. There are known problems with decompilers writing broken vmf files, though. Have you tried opening your decompiled maps in Hammer, see if they work there and save them before trying to import them in HammUEr again? Just checked with an inferno vmf from here, and that imports (mostly) fine, so maybe use those instead of your own decompiles?
Hello, I've a problem importing over 1000 of the props from CS:GO, the error in the log file is different depending on the HammUEr/UE4 version. On the latest (1.7.1 / 4.16) it looks like this.
When I rebuild the material master list after importing materials/textures, some extra props show up but not much really. The corresponding material to the missing models are imported flawlessly, it's only the models itself. As you can see, they show up in PropUEr window, they just fail to import.
Please help, if possible, these missing props are detrimental for my personal work. Thanks for understanding!
EDIT: I've some extra info I forgot to mention. Joe Wintergreen, someone who has been promoting your work has made a video on how to import Dust 2 from CS:GO with HammerUEr. He happens to be missing the same exact props as well so I can't be the only one. Another important thing to note is that some people been able to import the props I'm missing but they didn't seem to do anything fancy nor did they have this issue at all to begin with.
Some of CSGO's files as shipped are, for lack of a better word, corrupted. However, there is a solution for this: delete the <filename>.vtx file, but make sure you leave <filename>.dx90.vtx in place. That should let you import them.
While I'm at it, quite a lot of them also have the wrong internal filename that overlaps with another one, and since I'm using that to name them, there'll be "missing" and "wrong" models because of this. The little checkbox to the right forces HammUEr to use the filename instead of the internal one, and should take care of most of them problems. (You might have to re-import the "real" name ones if some of them got overwritten anyway)
Any chance you could add support for UDMF (Universal Doom Map Format) ? they are very easy to create, there are tons of these maps and some of them are actually very detailed, I really wish I could build a "base" in doom builder and then export to unreal engine to add extra details, thanks.
Hello, I am wondering when exactly the source build option will be updated for 4.16/HammUEr 1.7.1... I am looking to port my existing source engine game over to Unreal, and to do so, I want to use the C++ source for the engine to build the game from. I have attempted to use the current source build, but it seems to crash the editor on launch. Let me know if you guys will update that, it would be greatly appreciated!
I can't remember any reason why the previous archive wouldn't compile under 1.6 off the top of my head. Anyway, I've uploaded the 1.7.1 source archive I used to compile the 1.6 build
I'm having a bit of an issue with textures. No matter how many times I rebuild the material list, almost all of the materials show up as 'None' when importing maps. I can manually add them, but larger maps with 200+ textures would take way too long. Anyone have a fix for this?
Strange, that shouldn't be happening. Can you look at hammUErPlugin.cfg in your <project directory>\Config in a text editor and see if there's 5 things on every line (so MATERIALS/BRICK/BRICKFLOOR001A,512,512,0,BRICK/brickfloor001a_mat instead of MATERIALS/BRICK/BRICKFLOOR001A,512,512,0,). If almost everything shows up as None, they probably don't. What you can do is remove everything after the "hammUErVersion,4" line and saving the file, and do another discovery with rebuild master list ticked on. If you still have mostly 'None' materials, there's something else seriously wrong. Do you have directories with non-A-Z characters? (Accents or whatnot)
I tried and that didn't work. Everything is still 'None'. I do have my project saved to a different drive, not my C:\ drive. I do not know if that would cause anything, though, as my entire Epic Games installation is on my D:\ drive.
All of my materials are in one directory (uncreatively named 'SourceStuff') in my project. I tried to separate them in a different project but I still ran into this issue.
Different drives shouldn't matter. I... have no idea what could be wrong. A full rebuild should fill your database with everything it's found. If you turn on verbose debug messages on the ConfigUEr tab, you should have a lot of "LogTemp:Warning: ..... Adding to master material list" lines. What version are you running?
I've done some experimenting and I found that it might have something to do with the $selfillum and $selfillummask. About 70% of the materials loaded this time. The ones that didn't load either had a fucked up name or had an issue with the $selfillummask. Here's an example of the logs:
[2017.06.20-17.55.07:758][354]LogMaterial: Missing cached shader map for material HammUErBaseMaterial, compiling. [2017.06.20-17.55.07:758][354]LogMaterial:Warning: Failed to compile Material Instance /Game/SourceStuff/Materials/BUILDINGSET057A_mat.BUILDINGSET057A_mat with Base HammUErBaseMaterial for platform PCD3D_SM5, Default Material will be used in game. [2017.06.20-17.55.07:758][354]LogMaterial:Warning: (Node TextureSampleParameter2D) $selfillummask> Requires Texture2D
The $selfillummask node isn't used for most materials, so most of them compiled fine, but the $selfillummask param2D node got emptied, so you just need to put a random texture in there (it won't be used for most of them, and if it get used, it'll be replaced by what needs to be there anyway)
(while you're at it, check all the other nodes in your material to see if any of them got reset to nothing as well)
Hi. I am creating my own C# Bsp Library and I added you to description (if you have no problems).
I am no interrest in making importer into Unreal Engine but it (already) supports exporting into OBJ. I just wanted to let you know (tried PM but twitter did not allow it and itch.io does not support PMs).
Ok so i have imported all materials and models for half-life 2's first map and yet when i import it only like 2 surfaces actually get materials any ideas on how to fix this?
It should have worked, but there's a couple of possibilities.
Sometimes, you have to restart UE before actually importing a map after importing a bucketload of materials, since it takes it a while to catch up on the new files.
Did you check that the material assignments on import were correct? (If they weren't, you might have to rebuild the master list in the discovery section of the TextUEr tab)
Another possibility might be that your material might have some kind of problem if you're not using the supplied one that stops UE from rendering some combinations until the problem is fixed.
There is no specific support for CoD and other Quake-derived engines, nor will that be added. However, there is basic support (where the map format isn't too different) that should at least import basic brushwork from your own levels.
Oh, I'm sorry it took so long to figure out, but I got it. The only sure-fire way to stop z-fighting between different meshes is to adjust your brushes to not overlap in hammer before importing.
Not a bug, but a difference in how Source and UE do lightmapping. Make sure there's only one directional light in your map, otherwise it'll be overbright. Also, you might have to adjust lightmap resolutions, depending on your map.
You can either set your lightmap resolution higher than the default on the ConfigUEr tab so that it gets applied to everything on import (which might be overkill), or adjust them case-by-case in-editor by selecting the mesh in the level, then going to the details tab. Scroll down to the Lighting section, click overridden and select a new lightmap size. (If you want to do this automatically, I did another plugin that does that you might want to check out)
I'm sure there are eventual (rendering framerate linked) limits, but I couldn't really tell you what they are. It definitely won't take days to import your maps into UE either.
I have a question about this before I buy. So my question is, if I import my map into UE4, will I be able to edit the textures on individual sides of a model like in Hammer?
Not at the moment, I'm afraid. If it's a single brush, you can export the fbx to your favourite editing program and re-import. If it's multiple brushes, you should be able to tell HammUEr to only reimport those after you've modified them in Hammer.
(Epic are working on some kind of in-editor mesh modification thing, tho, although I've only seen it demo'd with VR?)
I'm assuming you mean "can a brush have multiple textures on it and still keep them", right? Then the answer is yes. The materials you've selected in Hammer will be applied to the faces in UE
Weird. It does, and if there are lights in your imported map (or if you add ones in your Unreal map, like the default map's sky sphere), it should automatically show you at least preview lighting for your map. (Example)
Sorry, there is no Source 2 support at the moment, nor is it planned, since Source 2 is a brand new engine which works in a totally different way from the older engines HammUEr supports.
← Return to Unreal Engine plugin
Comments
Log in with itch.io to leave a comment.
Hello!
I've tried to import materials/models from CSGO for about two days now and it ALWAYS crashes. Any idea why?
"Log file open, 06/19/18 13:28:43
LogWindows: Failed to load 'aqProf.dll' (GetLastError=126)
LogWindows: File 'aqProf.dll' does not exist
LogWindows: Failed to load 'VtuneApi.dll' (GetLastError=126)
LogWindows: File 'VtuneApi.dll' does not exist
LogWindows: Failed to load 'VtuneApi32e.dll' (GetLastError=126)
LogWindows: File 'VtuneApi32e.dll' does not exist
LogInit: Display: Running engine for game: HammEUr
LogPlatformFile: Not using cached read wrapper
LogInit: Display: RandInit(1962371680) SRandInit(1962371680).
LogInit: Read version file with build ID '3944462'
LogInit: Overriding engine version to CL 4033788, compatible CL 3944462
LogInit: Registered custom module enumerator with build ID '3944462'
LogTaskGraph: Started task graph with 5 named threads and 23 total threads with 3 sets of task threads.
LogStats: Stats thread started at 0.259854
LogD3D11RHI: Aftermath initialized"
Unfortunately, none of the things in this log have anything to do with HammUEr, so I can't really help you with this.
Some of those dll errors seem to refer to intel vtune, but a quick google doesn't seem to give any decent solutions, apart from maybe needing administrative rights when you install/run unreal engine?
Good luck, hope you figure it out.
I had just recently found out about this plugin for UE4, and I am actually running into the exact same issue. I am able to get the textures imported just fine, but when attempting to import .map or files it finishes loading from master list, the I get an immediate CTD.
I did try loading a .vmf which I had exported from Hammer Source SDK (originally on GoldSrc, used converter) and the map loaded into UE4 only once, any other time (same map) nothing showed up after loading and referring to master material list.
I'm running Epic Games Launcher as Admin, and I get the same thing as brikkew. I'm on UE4 4.19.2 w/ latest build of HammUEr
Could you optimize this so we can use it to work with Paragon maps?
I... don't really understand the question.
I'm trying to import the csgo materials and textures, but HammUEr seems to not being able to read the VMTs. It is importing the textures, but doesn't create material-instances.
Only when using the "create materials for not-used textures" dialog, it creates material-instances, but none of them uses the decal-material. (I exctracted the material files with gcfscape from csgo's pak01_dir.vpk and i'm using ue4.19)
I get a lot of errors like this in the output log:
"
LogTemp: Warning: Could not find , cutting down to smallest identifier.
LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b, aborting creation of material
LogTemp: Warning: Could not find , cutting down to smallest identifier.
LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b1, aborting creation of material
LogTemp: Warning: Could not find , cutting down to smallest identifier.
LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b1_blend, aborting creation of material
LogTemp: Warning: Could not find , cutting down to smallest identifier.
LogTemp: Error: Could not find texture for VMT asphalt/asphalt_b2, aborting creation of material
"
There was a change to the UE API I wasn't aware of, which led to this problem happening.
I've uploaded a new version, so please download "HammUEr 1.8 for 4.19 fixed" and try again.
Oh thank you very much, i was already so desperate, that i completely deleted, redownloaded and reinstalled ue4 and csgo :D
Edit: Yes, with the new version it creates materials-instances and decals as expected.
Same problem here!
I keep getting errors saying, "Binaries for the 'HammUEr' plugin are missing or incompatible with the current engine version." It also says "'HammUEr' failed to load because module 'HammUErRuntime' could not be found" I have UE 4.19.2 and HammUEr 1.8
The plugin should work with 4.19.2 as uploaded, so something might have gone wrong while downloading/extracting it.
Please download the new fixed version and try again.
Can you please upload a 4.19 fix version for source builds?
I'm also having this exact problem, tried downloading again a couple times.
Warning: No filename provided for module HammUErRuntime
Warning: ModuleManager: Unable to load module 'HammUErRuntime' because the file 'C:/Users/Josh/UnrealEngine/Engine/Binaries/Win64/' was not found.
the hammuer dll's are in the plugins binary directory. why is it looking in the engine binaries?
did you find the fix pls help i am having same problem
Only the "flat_normal" and the "HammUErBaseMaterial" show up and the "HammUErDecal" won't. i couldn't figure out what's wrong.
Can anyone help me?
Weird, if the others show up, it should show up as well.
If not, there's an example of what it should look like in the manual on page 6 (lower picture), so just build something that looks like that and use it instead.
i actually figured it out! my ue4 version was too old and the plugin probably didn't support it back then.. silly me
it takes me 2h+ importing textures and models from csgo to UE ive tried a different disk still didnt fix any suggestion on how to make it go faster?
Unfortunately, there's a lot of data to import, and there's really nothing you can do to make it go faster.
You only need to do it once, tho.
Does the 4.18 version work with 4.19??
4.19 build has been uploaded
Ah nice, I managed to get what I needed with 4.18 and migrated it to 4.19.
But still great job on the plugin.
Hi, when I import textures or models, my C:disk will be used. But I use D:disk, why?
I... have some trouble understanding what you're asking, but files that are imported end up wherever your unreal engine project is (because they need to be converted to something UE understands), which I guess is somewhere on your C drive in your case?
Unreal Engine uses a Cache to store temporaly your materials and meshes. You can change this folder-destination to your other drive under Edit->Editor Preferences and then under General->Global->Local Derived Data Cache.
oh! thanks
I even have one area where its starting to get curved for some reason
The 4.15 builds are pretty ancient by now, so hopefully a move to a newer one should fix this.
If not, try moving the brush in hammer and then moving it back into place where it was, or check the texturing and redo it so it looks the same but the values are different (if that makes sense)
I am still having issues with the 4.15.3 version of the tool. I am able to get all the materials and models over, but importing the .bsp still causes it to crash.
Did you mean .vmf file?
HammUEr has no support for compiled bsp files.
oops, I meant to say .vmf
Can you put the vmf on pastebin or google drive or something so I can test it locally?
Sorry for the delayed response. Here is the vmf that imports just fine in 4.18, but it won't in 4.15.
Thanks!
https://nofile.io/f/O1oNKuPowmX/JerichoLab_v2_d.vmf
I don't have access to my code archive at the moment, so I can't really check with an actual 4.15 build, but my guess is it's got something to do with the displacements?
(Also, this is a decompile, and decompiles are technically not supported. Maybe try opening it in HammUEr and saving it back to clean up whatever the decompiler did?)
Hallo, when I want to import props with porpUEr it all process and say done. Then I close that window and it wasn´t anywhere after restart too. What I need to do ? Thanks.
Sorry it took a while to get back to you.
If you selected one or more files, please check the log to see if there were any errors while importing.
Also check to see if any files were created in your project folder in windows explorer, because they don't always show up immediately in UE. (Although they should show up the next time you open the editor)
UE: 4.18.3
HammUEr: Latest
Followed official tutorials and some 3rd party, used provided base/decal presets.
Materials/Textures doesn't work in CS:GO maps.
Props/Maps etc works fine.
They show in HammUEr:
But...
i got the same problem
That looks like a base material problem.
Open your base material and check to see if it says anything about errors there, there might be a broken texture reference there you have to fix before it'll actually render.
The BaseMaterial had error for missing texture in NormalMap, so i added flat_normal there and saved. Importing again, will let you know if that solved the issue.
I'm having an issue with shadows on imported meshes that touch. There's really ugly shadow artifacts in between the meshes. I tried fixing with the world and light settings in my level, including upping the build quality, but nothing worked. Here's a screenshot showing my issue:
Is there any settings in HammUEr that I can change to fix this?
Try to use a nodraw material for faces that can't be seen, and grouping the walls together.
All the walls on the map or just sections of the walls?
Join the sections that have weird shadows where they intersect, basically
Hi. So this is a great piece of software. However, I am unable to import my .vmf in the 4.15 version of UE4. I am able to get the textures and models over, but it crashes the engine when importing the .vmf. I've tried a couple different systems and a few new Projects. Now I don't seem to have this problem with newer iterations of the engine and I haven't tried older versions.
I wanted to add to this, I just tried 4.14 and it does the exact same thing.
The pre-4.16 builds are rather old by now, and even Epic doesn't really support them any longer, officially.
Is there a specific reason you need to use such an old version of the Unreal Engine? If there is, I can *try* to debug it based on your logs and the vmf file, but if it imports fine in a newer version...
It works beautifully in 4.18, but I'm trying to import my work into PavlovVR (which appears to be built in the 4.15 version of the engine, or the template for it is). I would be happy to import the assets into 4.18 and migrate them to a project from older version but that doesn't seem to work either.
If it helps, the project log hits me with with "Failed to load ANSI text file: [users/x/x/x/x/x/x/x] materiallist." before crashing. I also tried rebuilding the masterlist but that didnt help either.
If there is another way to work around this, I'm open to suggestions.
Also, you can d/l the .bsp from here:
https://gamebanana.com/maps/196057
Thanks!
Do you have non-basic a-z 0-9 (so accented, asian, whatever) characters in the directory names/file names/material names?
I flipped through them all and didn't notice any unusual characters in the names.
Hi, I'm having a problem where the HL2 texture metalfence004a isn't getting imported.
Just tested it, and it should import fine.
It does seem to point to the texture Models/props_c17/fence_alpha, so if it couldn't find that, that might be why?
Hi.
Trying out Unreal for the first time, so it's quite likely I'm doing something wrong. It seems that just adding HammUEr as a plugin causes the compile to fail. I'm using "HammUEr 1.8 Alpha 3 for 4.18" and my Unreal version is 4.18 (4.18.0-3709383+++UE4+Release-4.18)
When trying to compile, I get "ERROR: Could not find definition for module 'HammUErRuntime' (referenced via Test.uproject -> HammUEr.uplugin)"
The simplest way to reproduce is start a new project (blank or FPS) and compile from in-editor. It will succeed. Then add HammUEr as a plugin, restart the editor and compile again. It will fail.
Am I perhaps missing some extra step needed to compile code?
Thanks
Just to clarify though, the actual tools do seem to work in the editor. I can import my Source materials and maps just fine. It's just the compile step that fails.
Ah, yeah, that's a kinda tricky one I keep forgetting to explain/add to the archive.
Basically, to fix this:
Compiling and packaging your project shouldn't be a problem any more.
Let me know if you do run into any more things or have questions.
Hey there. It does a quite good job, but is there a possibility to add the ability import the Brushes as UE BSP Brushes?
That would be awesome, because Brushes in UE are unique Actors instead of Static Mesh assets (It does not bloat the content folder)
It would require rebuilding the pipeline (since people explicitly didn't want anything to do with UE4's BSP tools), and wouldn't support everything, but I can try and fork a build that does that.
Wouldn't happen overnight, though, so don't hold your breath.
Hi, I would like to port my Soldier Of Fortune 2 maps, any issue about compatibility with SOF2 ? I have the .map files made with GTKradiant. Thank you.
Don't know anyone that's tried importing SOF2 maps yet, so I wouldn't be able to give a definitive answer, but I know people have imported Jedi Knight Academy maps without too much trouble, so it all depends on how 'vanilla' Raven kept the map format, I guess.
I could try importing one, if you put it online somewhere?
What's the proper way to deal with seams in between brushes that will inevitably occur? I'm importing a simple map with a couple rooms in and there are very obvious seams in between the brushes, and also between the floor and the walls. Obviously this occurs a lot with modular maps in UE4 but does Hammuer offer a solution to help alleviate this?
Have you tried turning on "Round accepted points to nearest integer"? That should be able to help with some of those problems (although it can't really help with larger gaps)
You can also minimize this by grouping the floors, and do a nodraw pass to ensure there are no extra faces. (ie: do what vbsp does manually, with nodraw)
can i pay it with paysafecard?
Unfortunately, I don't think itch.io supports paysafecard yet.
https://itch.io/t/92888/paysafecardpayment-methods
so, when importing props with hammuer, it doesnt say building master materials list, and when it finishes importing, no textures are connected to the mesh, so its just all grey, for e.g grey chicken, what do i do? I have imported all textures into csgo/textures, and all models into csgo/models
Are your base materials okay?
Try to open them and see if UE has any warnings about them.
Pretty sure the base materials were fine, ill re import the textures later, can you show me what the base materials should look like just so i can confirm?
yes the materials were fine, and imported properly, all meshes dont use textures from the game
Weird. Can you pastebin your import log for the import of a single model?
Hey, I'm having problem with CS:GO map import. After importing mats, props and then the map, models are showing up on the level, but not the biggest parts such as floors, walls, buildings etc., only models. But! I can see those bigger meshes in content browser, still there are too many of them to actually place them on my own. What do I possibly do wrong, or what should I do, to make them place on the level? As I said, everything with those meshes not placed in the level is fine, mats are assigned and created, they are just not placed at all.... huh.
Did it really not create any actors for the actual level geometry in your map?
Or are they just not being rendered?
Have you tried clicking the eye icon off and on to force a show all refresh, like in the troubleshooting section of the documentation?
Uhh, it's like, it places all those small models on the map except those big ones which are in contest browser still. Dunno why, tried refreshing the view as you said but it didn't fix anything. Worth to add is the fact, that it happens only to the newer cs:go maps, such as Inferno, but also Cache which is pretty old map, but I noticed something weird bout it. Both inferno and cache are having different type of write or something like that, cause they do not have the normal map compression and then materials + models in the game folder, I have to decompile them with embed files so the file structure is different. I gotta load materials separately cause I get them from the .bsp file after decompiling.
Weird. There are known problems with decompilers writing broken vmf files, though.
Have you tried opening your decompiled maps in Hammer, see if they work there and save them before trying to import them in HammUEr again?
Just checked with an inferno vmf from here, and that imports (mostly) fine, so maybe use those instead of your own decompiles?
Hello, I've a problem importing over 1000 of the props from CS:GO, the error in the log file is different depending on the HammUEr/UE4 version. On the latest (1.7.1 / 4.16) it looks like this.
The ones starting with "Tried to find..." are imported, the others aren't. Here's the underlined model missing in the viewport.
When I rebuild the material master list after importing materials/textures, some extra props show up but not much really. The corresponding material to the missing models are imported flawlessly, it's only the models itself. As you can see, they show up in PropUEr window, they just fail to import.
Please help, if possible, these missing props are detrimental for my personal work. Thanks for understanding!
EDIT: I've some extra info I forgot to mention. Joe Wintergreen, someone who has been promoting your work has made a video on how to import Dust 2 from CS:GO with HammerUEr. He happens to be missing the same exact props as well so I can't be the only one. Another important thing to note is that some people been able to import the props I'm missing but they didn't seem to do anything fancy nor did they have this issue at all to begin with.
Some of CSGO's files as shipped are, for lack of a better word, corrupted.
However, there is a solution for this: delete the <filename>.vtx file, but make sure you leave <filename>.dx90.vtx in place.
That should let you import them.
While I'm at it, quite a lot of them also have the wrong internal filename that overlaps with another one, and since I'm using that to name them, there'll be "missing" and "wrong" models because of this. The little checkbox to the right forces HammUEr to use the filename instead of the internal one, and should take care of most of them problems. (You might have to re-import the "real" name ones if some of them got overwritten anyway)
Thanks m8, all of my problems are solved through following your instructions. I'm a happy customer!
Any chance you could add support for UDMF (Universal Doom Map Format) ? they are very easy to create, there are tons of these maps and some of them are actually very detailed, I really wish I could build a "base" in doom builder and then export to unreal engine to add extra details, thanks.
Maybe. No promises, tho.
Hello, I am wondering when exactly the source build option will be updated for 4.16/HammUEr 1.7.1... I am looking to port my existing source engine game over to Unreal, and to do so, I want to use the C++ source for the engine to build the game from. I have attempted to use the current source build, but it seems to crash the editor on launch. Let me know if you guys will update that, it would be greatly appreciated!
I can't remember any reason why the previous archive wouldn't compile under 1.6 off the top of my head.
Anyway, I've uploaded the 1.7.1 source archive I used to compile the 1.6 build
I'm having a bit of an issue with textures. No matter how many times I rebuild the material list, almost all of the materials show up as 'None' when importing maps. I can manually add them, but larger maps with 200+ textures would take way too long. Anyone have a fix for this?
Strange, that shouldn't be happening.
Can you look at hammUErPlugin.cfg in your <project directory>\Config in a text editor and see if there's 5 things on every line (so MATERIALS/BRICK/BRICKFLOOR001A,512,512,0,BRICK/brickfloor001a_mat instead of MATERIALS/BRICK/BRICKFLOOR001A,512,512,0,). If almost everything shows up as None, they probably don't.
What you can do is remove everything after the "hammUErVersion,4" line and saving the file, and do another discovery with rebuild master list ticked on.
If you still have mostly 'None' materials, there's something else seriously wrong.
Do you have directories with non-A-Z characters? (Accents or whatnot)
I tried and that didn't work. Everything is still 'None'. I do have my project saved to a different drive, not my C:\ drive. I do not know if that would cause anything, though, as my entire Epic Games installation is on my D:\ drive.
(D:\Users\<username>\Documents\Unreal Projects\gm_bigcity\Config)
All of my materials are in one directory (uncreatively named 'SourceStuff') in my project. I tried to separate them in a different project but I still ran into this issue.
Different drives shouldn't matter.
I... have no idea what could be wrong. A full rebuild should fill your database with everything it's found.
If you turn on verbose debug messages on the ConfigUEr tab, you should have a lot of "LogTemp:Warning: ..... Adding to master material list" lines.
What version are you running?
Currently, I'm running on version 4.16. I tried with 4.15 as well but the problem still occurred.
Can you turn on verbose debug logging, rebuild your master list and pastebin or dropbox the log file so I can take a look at what's happening?
I've done some experimenting and I found that it might have something to do with the $selfillum and $selfillummask. About 70% of the materials loaded this time. The ones that didn't load either had a fucked up name or had an issue with the $selfillummask. Here's an example of the logs:
[2017.06.20-17.55.07:758][354]LogMaterial: Missing cached shader map for material HammUErBaseMaterial, compiling.
[2017.06.20-17.55.07:758][354]LogMaterial:Warning: Failed to compile Material Instance /Game/SourceStuff/Materials/BUILDINGSET057A_mat.BUILDINGSET057A_mat with Base HammUErBaseMaterial for platform PCD3D_SM5, Default Material will be used in game.
[2017.06.20-17.55.07:758][354]LogMaterial:Warning: (Node TextureSampleParameter2D) $selfillummask> Requires Texture2D
Second verse, same as the first.
The $selfillummask node isn't used for most materials, so most of them compiled fine, but the $selfillummask param2D node got emptied, so you just need to put a random texture in there (it won't be used for most of them, and if it get used, it'll be replaced by what needs to be there anyway)
(while you're at it, check all the other nodes in your material to see if any of them got reset to nothing as well)
Hi. I am creating my own C# Bsp Library and I added you to description (if you have no problems).
I am no interrest in making importer into Unreal Engine but it (already) supports exporting into OBJ. I just wanted to let you know (tried PM but twitter did not allow it and itch.io does not support PMs).
Ok so i have imported all materials and models for half-life 2's first map and yet when i import it only like 2 surfaces actually get materials any ideas on how to fix this?
It should have worked, but there's a couple of possibilities.
hi
And what it does for cod 5 map ?
There is no specific support for CoD and other Quake-derived engines, nor will that be added.
However, there is basic support (where the map format isn't too different) that should at least import basic brushwork from your own levels.
I found another BUG.
I used Hammuer to import a cs map,
I found that there are many models in the scene are part of the overlap,
When i walked into them,
They overlap the parts began to flash,
Is there a way to solve this?
I'm sorry, I have no idea what you mean.
Can you record a video or something?
Of course, I can record the video right away
Oh, I'm sorry it took so long to figure out, but I got it.
The only sure-fire way to stop z-fighting between different meshes is to adjust your brushes to not overlap in hammer before importing.
thank you for your help.
Another solution is, Merge map to a big static mesh
I found a BUG.
I imported a cs: source map,
I found the mesh lightmap problem,
The color is not normal after building the lights.
Do you know how to fix this?
Not a bug, but a difference in how Source and UE do lightmapping.
Make sure there's only one directional light in your map, otherwise it'll be overbright.
Also, you might have to adjust lightmap resolutions, depending on your map.
Thanks, do you know how to adjust lightmap resolutions?
You can either set your lightmap resolution higher than the default on the ConfigUEr tab so that it gets applied to everything on import (which might be overkill), or adjust them case-by-case in-editor by selecting the mesh in the level, then going to the details tab. Scroll down to the Lighting section, click overridden and select a new lightmap size.
(If you want to do this automatically, I did another plugin that does that you might want to check out)
Great autolightmapuer plugin, i'm using it
Are there any type of limits on the maximum number of brushes? Some of the maps I had took almost days to compile in Hammer.
I'm sure the limits are much larger in UE though.
I'm sure there are eventual (rendering framerate linked) limits, but I couldn't really tell you what they are.
It definitely won't take days to import your maps into UE either.
I have a question about this before I buy. So my question is, if I import my map into UE4, will I be able to edit the textures on individual sides of a model like in Hammer?
Not at the moment, I'm afraid. If it's a single brush, you can export the fbx to your favourite editing program and re-import. If it's multiple brushes, you should be able to tell HammUEr to only reimport those after you've modified them in Hammer.
(Epic are working on some kind of in-editor mesh modification thing, tho, although I've only seen it demo'd with VR?)
Ok. However, If I do use textures on different faces will it also be transferred over to UE4?
I'm assuming you mean "can a brush have multiple textures on it and still keep them", right?
Then the answer is yes. The materials you've selected in Hammer will be applied to the faces in UE
Yes, that is what I mean. And thanks for the reply!
every map i import turns black and wont light? does hammuer not generate uvs?
Weird.
It does, and if there are lights in your imported map (or if you add ones in your Unreal map, like the default map's sky sphere), it should automatically show you at least preview lighting for your map. (Example)
Hello, just wondering if this plugin would allow me to import old Enemy Territory maps to UE4?
Sort of.
If you still have your original map file, it *should* be able to import most(?) of it correctly.
The ones I've seen based on decompiled bsp files (which has been all the test stuff people have sent me) all had broken texture scaling, tho.
Sorry, there is no Source 2 support at the moment, nor is it planned, since Source 2 is a brand new engine which works in a totally different way from the older engines HammUEr supports.